Pro AV Catalog
Black Box - AVX-HDMI2-HDB
Black Box - AVX-HDMI2-HDB Black Box - AVX-HDMI2-HDB Black Box - AVX-HDMI2-HDB Black Box - AVX-HDMI2-HDB
black-box
Request
Quote
All Products
from this brand

HDMI 2.0 Extender over CATx

Model: AVX-HDMI2-HDB

  • HDCP 22 compliant
  • HD signal transmission via a single CAT5e/CAT6 cable up to 100m (1080p) and 70m (4K at 60Hz YUV 4:4:4)
  • HD signal transmission via a single CAT6A/7 cable up to 100m (1080p) and 100m (4K at 60Hz YUV 4:4:4)
  • IR pass-through function allows you to control the source from the display location or control the display from the source location
  • Use two RS232 control systems for serial communication by connecting to the devices via serial cables to control the source device or display
Compare
Project List
Product Info
Tech Specs
Documents
  • Locking HDMI connector prevents accidental cable disconnects
  • CE, FCC, IC, RCM, and VCCI approvals

Send high-quality video and audio signals further, without replacing the copper cable, with this HDMI 2.0 Extender. In compliance with HDR and HDCP 2.2 standards, it supports 4 at 60 4:4:4 resolution, Dolby and DTS HD audio, and bi-directional IR control, in a low-profile box. Configure the ARC channel feed for a TV (with ARC support) or an auxiliary S/PDIF input port via an audio output DIP switch on the receiver. The extender uses proprietary one-way PoC technology to power the receiver from the transmitter. LEDs show power and signal status for established connections between devices.

With increased bandwidth up to 18-Gbps, you can extend signals over CATx cable up to 328-ft. while maintaining:

  • Higher resolutions
  • Higher frame rates
  • Multiple full HD streams in the same pipe
  • 21:9 aspect ratio
  • HDCP 22 compliant
  • HD signal transmission via a single CAT5e/CAT6 cable up to 100m (1080p) and 70m (4K at 60Hz YUV 4:4:4)
  • HD signal transmission via a single CAT6A/7 cable up to 100m (1080p) and 100m (4K at 60Hz YUV 4:4:4)
  • IR pass-through function allows you to control the source from the display location or control the display from the source location
  • Use two RS232 control systems for serial communication by connecting to the devices via serial cables to control the source device or display
 
Request Quote
 

Tel:  216-514-5023   |   Email:  info@npiav.com